An Air-Stable Storage Compound for White Phosphorus: Reversible Addition to a Stannylene and Chemical Release of P4.

Controlled insertion into a single P-P bond of white phosphorus (P4) was achieved by employing a diaryl stabilized stannylene, Ar*2Sn (Ar* = 2,6-bis(benzhydryl)-4-iPr-phenyl). Conversions of the stannylene with P4 gave a non-pyrophoric, air-stable storage compound, which releases P4 quantitively upon irradiation with light (354 or 455 nm). Alternatively, the phosphorus cage is detached by reacting the storage compound with PhChChPh (Ch = Se, Te). Despite the recent advances in the directed conversion of P4 using main group element compounds, Ar*2Sn constitutes only the second structurally characterized example of a stannylene capable of performing controlled, reversible addition and release of white phosphorus.

Wavelength-dependent rearrangements of an α-dione chromophore: a chemical pearl in a bis(hypersilyl) oyster.

The symmetric bissilyl-dione 3 reveals two well-separated n → π* absorption bands at λmax = 637 nm (ε = 140 mol-1 dm3 cm-1) and 317 nm (ε = 2460 mol-1 dm3 cm-1). Whereas excitation of 3 at λ = 360/365 nm affords an isolable siloxyketene 4 in excellent yields, irradiation at λ = 590/630 nm leads to the stereo-selective and quantitative formation of the siloxyrane 5. These remarkable wavelength-dependent rearrangements are based on the electronic and steric properties provided by the hypersilyl groups. While the siloxyketene 4 is formed via a hitherto unknown 1,3-hypersilyl migration via the population of a second excited singlet state (S2, λmax = 317 nm, a rare case of anti-Kasha reactivity), the siloxyrane 5 emerges from the first excited triplet state (T1via S1λmax = 637 nm). These distinct reaction pathways can be traced back to specific energy differences between the S2, S1 and T1, an electronic consequence of the bissilyl substited α-dione (the "pearl"). The hypersilyl groups act as protective ''oyster shell", which are responsible for the clean formation of 4 and 5 basically omitting side products. We describe novel synthetic pathways to achieve hypersilyl substitution (3) and report an in-depth investigation of the photorearrangements of 3 using UV/vis, in situ IR, NMR spectroscopy and theoretical calculations.

Assignment of individual structures from intermetalloid nickel gallium cluster ensembles.

Poorly selective mixed-metal cluster synthesis and separation yield reaction solutions of inseparable intermetalloid cluster mixtures, which are often discarded. High-resolution mass spectrometry, however, can provide precise compositional data of such product mixtures. Structure assignments can be achieved by advanced computational screening and consideration of the complete structural space. Here, we experimentally verify structure and composition of a whole cluster ensemble by combining a set of spectroscopic techniques. Our study case are the very similar nickel/gallium clusters of M12, M13 and M14 core composition Ni6+xGa6+y (x + y ≤ 2). The rationalization of structure, bonding and reactivity is built upon the organometallic superatom cluster [Ni6Ga6](Cp*)6 = [Ga6](NiCp*)6 (1; Cp* = C5Me5). The structural conclusions are validated by reactivity tests using carbon monoxide, which selectively binds to Ni sites, whereas (triisopropylsilyl)acetylene selectively binds to Ga sites.

All-Hydrocarbon-Ligated Superatomic Gold/Aluminum Clusters.

Key strategies in cluster synthesis include the use of modulating agents (e.g., coordinating additives). We studied the influence of various phosphines exhibiting different steric and electronic properties on the reduction of the Au(I) precursor to Au(0) clusters. We report a synthesis of the bimetallic clusters [Au6(AlCp*)6] = [Au6Al6](Cp*)6 (1) and [HAu7(AlCp*)6] = [HAu7Al6](Cp*)6 (2) (Cp* = pentamethylcyclopentadiene) using Au(I) precursors and AlCp*. The cluster [Au2(AlCp*)5] = [Au2Al5](Cp*)5 (3) was isolated and identified as an intermediate species in the reactions to 1 and 2. The processes of cluster growth and degradation were investigated by in situ 1H NMR and LIFDI-MS techniques. The structures of 1 and 2 were established by DFT geometry optimization. These octahedral clusters can both be described as closed-shell 18-electron superatoms.

Myocardial strain assessment in the human fetus by cardiac MRI using Doppler ultrasound gating and feature tracking.

OBJECTIVES: Assessment of myocardial strain by feature tracking magnetic resonance imaging (FT-MRI) in human fetuses with and without congenital heart disease (CHD) using cardiac Doppler ultrasound (DUS) gating. METHODS: A total of 43 human fetuses (gestational age 28-41 weeks) underwent dynamic cardiac MRI at 3 T. Cine balanced steady-state free-precession imaging was performed using fetal cardiac DUS gating. FT-MRI was analyzed using dedicated post-processing software. Endo- and epicardial contours were manually delineated from fetal cardiac 4-chamber views, followed by automated propagation to calculate global longitudinal strain (GLS) of the left (LV) and right ventricle (RV), LV radial strain, and LV strain rate. RESULTS: Strain assessment was successful in 38/43 fetuses (88%); 23 of them had postnatally confirmed diagnosis of CHD (e.g., coarctation, transposition of great arteries) and 15 were heart healthy. Five fetuses were excluded due to reduced image quality. In fetuses with CHD compared to healthy controls, median LV GLS (- 13.2% vs. - 18.9%; p < 0.007), RV GLS (- 7.9% vs. - 16.2%; p < 0.006), and LV strain rate (1.4 s-1 vs. 1.6 s-1; p < 0.003) were significantly higher (i.e., less negative). LV radial strain was without a statistically significant difference (20.7% vs. 22.6%; p = 0.1). Bivariate discriminant analysis for LV GLS and RV GLS revealed a sensitivity of 67% and specificity of 93% to differentiate between fetuses with CHD and healthy fetuses. CONCLUSION: Myocardial strain was successfully assessed in the human fetus, performing dynamic fetal cardiac MRI with DUS gating. Our study indicates that strain parameters may allow for differentiation between fetuses with and without CHD. CLINICAL RELEVANCE STATEMENT: Myocardial strain analysis by cardiac MRI with Doppler ultrasound gating and feature tracking may provide a new diagnostic approach for evaluation of fetal cardiac function in congenital heart disease. KEY POINTS: • MRI myocardial strain analysis has not been performed in human fetuses so far. • Myocardial strain was assessed in human fetuses using cardiac MRI with Doppler ultrasound gating. • MRI myocardial strain may provide a new diagnostic approach to evaluate fetal cardiac function.

Understanding and Controlling Molecular Compositions and Properties in Mixed-Linker Porphyrin Metal-Organic Frameworks.

Porphyrin-based metal-organic frameworks (MOFs) are attractive materials for photo- and thermally activated catalysis due to their unique structural features related to the porphyrin moiety, guest-accessible porosity, and high chemical tunability. In this study, we report the synthetic incorporation of nonplanar ß-ethyl-functionalized porphyrin linkers into the framework structure of PCN-222, obtaining a solid-solution series of materials with different modified linker contents. Comprehensive analysis by a combination of characterization techniques, such as NMR, UV-vis and IR spectroscopy, powder X-ray diffraction, and N2 sorption analysis, allows for the confirmation of linker incorporation. A detailed structural analysis of intrinsic material properties, such as the thermal response of the different materials, underlines the complexity of synthesizing and understanding such materials. This study presents a blueprint for synthesizing and analyzing porphyrin-based mixed-linker MOF systems and highlights the hurdles of characterizing such materials.

Benzene-1,4-Di(dithiocarboxylate) Linker-Based Coordination Polymers of Mn2+, Zn2+, and Mixed-Valence Fe2+/3.

Three new coordination polymers (CPs) constructed from the linker 1,4-di(dithiocarboxylate) (BDDTC2-)─the sulfur-analog of 1,4-benzenedicarboxylate (BDC2-)─together with Mn-, Zn-, and Fe-based inorganic SBUs are reported with description of their structural and electronic properties. Single-crystal X-ray diffraction revealed structural diversity ranging from one-dimensional chains in [Mn(BDDTC)(DMF)2] (1) to two-dimensional (2D) honeycomb sheets observed for [Zn2(BDDTC)3][Zn(DMF)5(H2O)] (2). Gas adsorption experiments confirmed a 3D porous structure for the mixed-valent material [Fe2(BDDTC)2(OH)] (3). 3 contains a 1:1 ratio of Fe2+/3+ ions, as evidenced by 57Fe Mössbauer, X-band EPR, and X-ray absorption spectroscopy. Its empirical formula was established by elemental analysis, thermal gravimetric analysis, infrared vibrational spectroscopy, and X-ray absorption spectroscopy in lieu of elusive single-crystal X-ray diffraction data. In contrast to the Mn- and Zn-based compounds 1 and 2, the Fe2+/3+ CP 3 showed remarkably high electrical conductivity of 5 × 10-3 S cm-1 (according to van der Pauw measurements), which is within the range of semiconducting materials. Overall, our study confirms that sulfur derivatives of typical carboxylate linkers (e.g., BDC) are suitable for the construction of electrically conducting CPs, due to acceptedly higher covalency in metal-ligand bonding compared to the electrically insulating carboxylate CPs or metal-organic frameworks. At the same time, the direct comparison between insulating CPs 1 and 2 with CP 3 emphasizes that the electronic structure of the metal is likewise a crucial aspect to construct electrically conductive materials.

Symmetrical and Mixed Tris(acyl)phosphines: Synthesis, Oxidation and Photochemistry.

Invited for the cover of this issue are the groups of M. Haas, G. Gescheidt and H. Grützmacher from the Graz University of Technology and the ETH Zürich. The image depicts a phosphorus mine, where the workers are acid chlorides using their shovels and red phosphorus to provide the chemicals necessary to produce novel reagents. Read the full text of the article at 10.1002/chem.202302535.

Breaking the photoswitch speed limit.

The forthcoming generation of materials, including artificial muscles, recyclable and healable systems, photochromic heterogeneous catalysts, or tailorable supercapacitors, relies on the fundamental concept of rapid switching between two or more discrete forms in the solid state. Herein, we report a breakthrough in the "speed limit" of photochromic molecules on the example of sterically-demanding spiropyran derivatives through their integration within solvent-free confined space, allowing for engineering of the photoresponsive moiety environment and tailoring their photoisomerization rates. The presented conceptual approach realized through construction of the spiropyran environment results in ~1000 times switching enhancement even in the solid state compared to its behavior in solution, setting a record in the field of photochromic compounds. Moreover, integration of two distinct photochromic moieties in the same framework provided access to a dynamic range of rates as well as complementary switching in the material's optical profile, uncovering a previously inaccessible pathway for interstate rapid photoisomerization.

To Bond or Not to Bond: Metal-Metal Interaction in Heterobimetallic Rare-Earth Metal-Silver Complexes.

The reaction of 2,4-tBu2-6-(PPh2)PhOH (HOArP) with silver(I) triflate in a 3:1 molar ratio gave the mononuclear coinage metal complex (HOArP-κP)3AgIOTf (1). Treatment of HOArP with LnIII[N(SiMe3)2]3 (Ln = La, Sm, Y, Yb) in a 3:1 molar ratio yielded the mononuclear rare-earth metal complexes LnIII(OArP-κ2O,P)3 (2-Ln). The heterobimetallic rare-earth metal-silver complexes LnIII(OTf)(µ-OArP-1κ1O,2κ1P)3AgI (3-Ln) were prepared from monometallic precursors by reactions of equimolar amounts of 1 with LnIII[N(SiMe3)2]3 or 2-Ln with silver(I) triflate, respectively. The compounds were characterized by NMR, ultraviolet-visible (UV-vis), and infrared (IR) spectroscopy, single-crystal X-ray diffraction, elemental analysis, and the effective magnetic moments of the paramagnetic complexes were determined via the Evans NMR method. Computational studies were conducted on 3-La and 3-Y.

Fabrication of Amorphous Silicon-Carbon Hybrid Films Using Single-Source Precursors.

The aim of this study was the preparation of different amorphous silicon-carbon hybrid thin-layer materials according to the liquid phase deposition (LPD) process using single-source precursors. In our study, 2-methyl-2-silyltrisilane (methylisotetrasilane; 2), 1,1,1-trimethyl-2,2-disilyltrisilane (trimethylsilylisotetrasilane; 3), 2-phenyl-2-silyltrisilane (phenylisotetrasilane; 4), and 1,1,2,2,4,4,5,5-octamethyl-3,3,6,6-tetrasilylcyclohexasilane (cyclohexasilane; 5) were utilized as precursor materials and compared with the parent compound 2,2-disilyltrisilane (neopentasilane; 1). Compounds 2-5 were successfully oligomerized at λ = 365 nm with catalytic amounts of the neopentasilane oligomer (NPO). These oligomeric mixtures (NPO and 6-9) were used for the preparation of thin-layer materials. Optimum solution and spin coating conditions were investigated, and amorphous silicon-carbon films were obtained. All thin-layer materials were characterized via UV/vis spectroscopy, light microscopy, spectroscopic ellipsometry, XPS, SEM, and SEM/EDX. Our results show that the carbon content and especially the bandgap can be easily tuned using these single-source precursors via LPD.

Highly functionalized diaminocyclopentanes: A new route to potent and selective inhibitors of human O-GlcNAcase.

A new class of compounds inhibiting de-O-glycosylation of proteins has been identified. Highly substituted diaminocyclopentanes are impressively selective reversible non-transition state O-ß-N-acetyl-d-glucosaminidase (O-GlcNAcase) inhibitors. The ease of preparative access and remarkable biological activities provide highly viable leads for the development of anti-tau-phosphorylation agents with a view to eventually ameliorating Alzheimer's disease.

Symmetrical and Mixed Tris(acyl)phosphines: Synthesis, Oxidation and Photochemistry.

Herein, we present a convenient synthesis for symmetrical and mixed substituted tris(acyl)phosphines (TAPs) starting from red phosphorus. All TAPs exhibit a phosphaalkene-acylphosphine equilibrium, which was investigated in detail by variable-temperature (VT) NMR spectroscopy supported by density-functional theory (DFT) calculations. Depending on the substituents, two phosphaalkene derivatives and ten acylphosphine derivatives could be isolated. NMR spectroscopy and single-crystal X-ray crystallography enabled a clear structural assignment of these compounds. Oxidation of selected TAPs led to the formation of the corresponding tris(acyl)phosphine oxides (TAPOs). Furthermore, their spectroscopic properties as well as their photochemistry was investigated. Especially, the TAPO compounds were evaluated for their suitability as photoinitiators by CIDNP spectroscopy, photobleaching measurements and by storage stability tests.

Lewis Acid Catalyzed Amide Bond Formation in Covalent Graphene-MOF Hybrids.

Covalent hybrids of graphene and metal-organic frameworks (MOFs) hold immense potential in various technologies, particularly catalysis and energy applications, due to the advantageous combination of conductivity and porosity. The formation of an amide bond between carboxylate-functionalized graphene acid (GA) and amine-functionalized UiO-66-NH2 MOF (Zr6O4(OH)4(NH2-bdc)6, with NH2-bdc2- = 2-amino-1,4-benzenedicarboxylate and UiO = Universitetet i Oslo) is a highly efficient strategy for creating such covalent hybrids. Previous experimental studies have demonstrated exceptional properties of these conductive networks, including significant surface area and functionalized hierarchical pores, showing promise as a chemiresistive CO2 sensor and electrode materials for asymmetric supercapacitors. However, the molecular-level origin of the covalent linkages between pristine MOF and GA layers remains unclear. In this study, density functional theory (DFT) calculations were conducted to elucidate the mechanism of amide bond formation between GA and UiO-66-NH2. The theoretical calculations emphasize the crucial role of zirconium within UiO-66, which acts as a catalyst in the reaction cycle. Both commonly observed hexa-coordinated and less common hepta-coordinated zirconium complexes are considered as intermediates. By gaining detailed insights into the binding interactions between graphene derivatives and MOFs, strategies for tailored syntheses of such nanocomposite materials can be developed.

Metal-Metal Bonding in Late Transition-Metal [M2L5] Complexes: Exploring the Limits of the Isolobal Analogy between the CO and AlCp* Ligands.

Late dinuclear transition-metal (especially group 10 and 11) homoleptic carbonyl complexes are elusive species and have so far not been isolated. A typical example is the 30-electron species [Ni2(CO)5], the structure and bonding of which is still debated. We show that, by using the AlCp* ligand (isolobal to CO), it is possible to isolate and fully characterize [Ni2(AlCp*)5] (1), which inspired us to revisit by DFT calculations, the bonding situation within [Ni2L5] (L = CO, AlCp*) and other isoelectronic species. The short Ni-Ni X-ray distance in 1 (2.270 Å) should not be attributed to the existence of a typical localized triple-bond between the metals, but rather to a strong through-bond interaction involving the three bridging ligands via their donating lone pairs and accepting π* orbitals. In contrast, in the isostructural 32-electron [Au2(AlCp*)5] (2) cluster an orbital with M-M antibonding and Al...Al bonding character is occupied, which is in accordance with the particularly long Au-Au distance (3.856 Å) and rather short Al...Al contacts between the bridging ligands (2.843 Å). This work shows that, unlike late transition-metal [M2(CO)x] species, stable [M2(AlCp*)x] complexes can be isolated, owing to the subtle differences between CO and AlCp*. We propose a similar approach for rationalizing the bonding in the emblematic 34 electron species [Fe2(CO)9].

Catalytic Alkyne Semihydrogenation with Polyhydride Ni/Ga Clusters.

The bimetallic, decanuclear Ni3 Ga7 -cluster of the formula [Ni3 (GaTMP)3 (µ2 -GaTMP)3 (µ3 -GaTMP)] (1, TMP=2,2,6,6-tetramethylpiperidinyl) reacts reversibly with dihydrogen under the formation of a series of (poly-)hydride clusters 2. Low-temperature 2D NMR experiments at -80 °C show that 2 consist of a mixture of a di- (2Di ), tetra- (2Tetra ) and hexahydride species (2Hexa ). The structures of 2Di and 2Tetra are assessed by a combination of 2D NMR spectroscopy and DFT calculations. The cooperation of both metals is essential for the high hydrogen uptake of the cluster. Polyhydrides 2 are catalytically active in the semihydrogenation of 4-octyne to 4-octene with good selectivity. The example is the first of its kind and conceptually relates properties of molecular, atom-precise transition metal/main group metal clusters to the respective solid-state phase in catalysis.

Silicon- and Germanium-Functionalized Perylene Diimides: Synthesis, Optoelectronic Properties, and Their Application as Non-fullerene Acceptors in Organic Solar Cells.

Organic solar cells have been continuously studied and developed through the last decades. A major step in their development was the introduction of fused-ring non-fullerene electron acceptors. Yet, beside their high efficiency, they suffer from complex synthesis and stability issues. Perylene-based non-fullerene acceptors, in contrast, can be prepared in only a few steps and display good photochemical and thermal stability. Herein, we introduce four monomeric perylene diimide acceptors obtained in a three-step synthesis. In these molecules, the semimetals silicon and germanium were added in the bay position, on one or both sides of the molecules, resulting in asymmetric and symmetric compounds with a red-shifted absorption compared to unsubstituted perylene diimide. Introducing two germanium atoms improved the crystallinity and charge carrier mobility in the blend with the conjugated polymer PM6. In addition, charge carrier separation is significantly influenced by the high crystallinity of this blend, as shown by transient absorption spectroscopy. As a result, the solar cells reached a power conversion efficiency of 5.38 %, which is one of the highest efficiencies of monomeric perylene diimide-based solar cells recorded to date.

Photochemically generated reactive sites at ruthenium/gallium complexes: catalysis vs. cluster growth.

Irradiation of [Ru(GaCp*)3(SiEt3)H3] (1) at 350 nm induces reductive elimination of dihydrogen and triethylsilane and generates unsaturated Ru/Ga species. This photochemically induced cascading reductive elimination processes generate the reactive intermediate [Ru(GaCp*)3], which can be trapped by diphosphine coordination to yield the stable complex [(dppe)Ru(GaCp*)3] (4). The photochemically generated RuGa3 species is catalytically active in the hydrogenation of alkynes, which is further investigated by 1H NMR and mass spectrometry. Formation of intermetallic Ru/Ga clusters is observed as a competing and for the catalytic activity of the species limiting side reaction.

Cooperative and Orthogonal Switching in the Solid State Enabled by Metal-Organic Framework Confinement Leading to a Thermo-Photochromic Platform.

Cooperative behavior and orthogonal responses of two classes of coordinatively integrated photochromic molecules towards distinct external stimuli were demonstrated on the first example of a photo-thermo-responsive hierarchical platform. Synergetic and orthogonal responses to temperature and excitation wavelength are achieved by confining the stimuli-responsive moieties within a metal-organic framework (MOF), leading to the preparation of a novel photo-thermo-responsive spiropyran-diarylethene based material. Synergistic behavior of two photoswitches enables the study of stimuli-responsive resonance energy transfer as well as control of the photoinduced charge transfer processes, milestones required to advance optoelectronics development. Spectroscopic studies in combination with theoretical modeling revealed a nonlinear effect on the material electronic structure arising from the coordinative integration of photoresponsive molecules with distinct photoisomerization mechanisms. Thus, the reported work covers multivariable facets of not only fundamental aspects of photoswitch cooperativity, but also provides a pathway to modulate photophysics and electronics of multidimensional functional materials exhibiting thermo-photochromism.